The ANACONDA sewer camera is one of the most affordable Pan-and-Tilt pipe inspection systems on the market today. It features a new, completely waterproof 2 inch (50mm) diameter camera head, which is well suited for inspecting sewers, drains, ducts, manholes, culverts, wells, and tanks. This is going to give you the best image quality at a reasonable price.
The Pan-and-Tilt function of the camera head means that the head will pan side to side at least 90⁰ in each direction, to better view the side walls or around corners, and you can also spin the camera head in a full 360⁰ circle enabling you to fully survey the entire surface of the inspection area. The high resolution color SONY CCD sensor is protected by a durable, scratch proof, sapphire lens and aluminum and stainless steel construction, which is IP68 waterproof. The 6 white LEDs are large great at illuminating large diameter areas and providing consistent light dispersion over the entire surface, and there is a built in 512Hz sonde to locate the camera head underground. The camera head of the ANACONDA sewer camera is also interchangeable, which is great for areas that may require spare parts or back up units due to damage or contamination.
The PVC coated fiberglass push cable is waterproof, and available in either 60 meter (197') or 120 meter (394') lengths built onto a standalone steel reel, with a built in onscreen footage counter, with controls, and a locking mechanism.
The control unit is equipped with an 8” color TFT wide screen monitor that allows you to easily inspect pipelines, sewers, mainlines, water systems and different vessels from street level. All the details of an inspection can be viewed on site, or saved as video and images directly to a USB flash drive. The monitor also houses a full keyboard to add pages of text to capture files, a microphone, the onscreen foot counter, a rechargeable battery for portable use, the joystick controls for the camera head, capture buttons, video input and outputs, and a port for smaller camera heads and push cables.
The ANACONDA sewer camera does include a plastic centering skids for 4-6 inch lines, to center and protect the camera head. For larger diameter inspections, 8-24 inch lines, the optiona metal VCM-SK rolling skid would be ideal to center the camera head and roll down these lines instead of just pushing this along the bottom or through build up.
- Camera Head Diameter: 50mm (2")
- Camera Head Length: 137mm (6")
- Image sensor: SONY CCD
- Horizontal resolution: 700TV Lines
- Camera head Housing: Aluminum/Stainless steel
- Illumination: White LEDS
- Brightness of the LEDS: Adjustable
- View Angle: 120°
- Focus: Auto
- 512Hz Built in sonde
- Waterproof: IP68
Display & Storage system:
- Size of the screen: 8’’ TFT LCD
- Resolution: 800 x 600
- Image / Video capture
- Joystick type rotation control
- On screen meter (footage) counter
- USB Flash drive storage
- USB interface: USB output
- Recording pause function
- Integrated keyboard
- Integrated microphone
- A/V output
- 8800mA rechargeable Li-ion Battery Pack
- Battery level indicator
Push Cable and Reel:
- Fibreglass rod push cable
- Footage counter with "feet/meter" switch
- Push Cable diameter ø7mm / ø9mm
- Push Cable Length: 60m (196.8ft) / 120m (393.7ft)
- Mechanical brake
- Reel dimensions: 51x25x64cm / 70x28x84cm
- Centering Skids
Optional Roller Skid for large diameter pipes
Recently I had a situation where I needed to figure out why an existing duct shaft was not getting enough air to pass thru it and we contacted your company for options.
Rather than opening up the walls on each of the 8 floors to gain access to this duct shaft( which would have been very costly).
Roman advised us that you had camera’s with video capability that could be rented and dropped into the ducting to look for the blockage. He was very knowledgeable about the equipment and very understanding with our situation.
I found the customer satisfaction to be very positive working with this company.
- Written by Kevin McIntyre
RFQ on 2.3" Pan-and-Tilt Sewer Camera ANACONDA and lead time to Singapore
- Written by Billy M.
Hi Billy, the lead time usually depends on the availability in stock. The delivery to Singapore is usually up to a week.
Our sales team will contact you shortly.