My cart (You have no items in your shopping cart.
Borescope for Rifle Inspection
barrel inspection with bore scope, borescope probe with camera
Sign Up for Updates
Cleaning and maintaining the barrel is an extremely important part of caring for any firearm, ensuring safe and accurate long-term use. Rigid borescopes are a valuable tool for inspecting not just the barrel, but just about any hard to visualize places on a firearm, all you need is a space large enough to insert the lens into. Borescopes for barrel inspections are relatively easy to use and allow you real time visualization; cameras can also be attached to the borescope to take pictures or record video during visual inspection. Borescopes for firearm provide the only way to truly fully inspect inside the barrel of a gun or rifle, allowing you to have a clear, crisp and up close views of the entire barrel. The bore of a firearm is subject to wear every time it is fired or cleaned, using a rifle inspection borsecope to inspect the firearm will allow you to clean and maintain the gun much more thoroughly. This will save you time, improve accuracy, and prolonging the working life of your fire arm.
Borescopes can be used to:
- Inspect new and used guns before purchasing
- Check that bore has been properly cleaned
- Check for wear on the bore
- Identify areas of fouling in the barrel
- Inspect barrels for defects
- Inspect insides of cases, lug recesses, etc.
Traditionally flexible and rigid borescopes are widely used for barrel maintenance control. They provide the viewer with an absolutely crisp and clear image, due to special rod lens optical system inserted into the insertion tube. Better images, with less flares, will be seen from rigid borescopes with fixed side view lens (30, 90 or 110 degree direction of view) compared to borescopes with mirror tips attached. Another option is new German made rigid borescopes with swivel lenses. Patented 360° Rotatable Objective Sleeves with viewing directions of 30°, 70° and 90° provide freedom of access, without moving the body of the scope. These interchangeable lenses, compared to rotating mirrors, show significantly better detailed images of the inspection area. For inspections of extra small bores in firearm mechanism ultra thin fiberscopes will be the best choice. With outer diameter as small as 0.5mm virtually any gun's bore can be reached and inspected. And finally, thanks to new technologies we have videoscopes also available for firearm’s barrel control. Video borescopes have a micro camera on a rotating tip that let you see real time image on a portable monitor, capture it as snapshots or record video and transfer to computer for documentation of inspection process. Check out our line of Heron video borescopes to see how they can work for you.
- view nowStarting at$720.00
Rigid Borescope- Ø from 2.7mm (0.1in) and up, stainless steel probe
- Working Length – up to 600mm (23.6in)
- Direction of View (DOV) - 0°, 30°, 70°, 90° or 110°
- Rod Lens optical system
- Completely waterproof design
- Light post connections - ACMI, STORZ, OLYMPUS, WOLF
- 32mm Universal Eyepiece
- Complimentary LED Light handle, to illuminate the inspection area. (INCLUDED)
• Insertion tube diameter: 2.7 mm (0.11"), 4 mm (0.16"), 5 mm (0,2") or 6 mm (0.24").
• Angle/ Direction of View (DOV): 0°, 30°, 70°, 90° or 110°.
• 55° Field of View (FOV)
• ACMI, STORZ, WOLF Light post connection
• 32mm standard round rigid scope Eyepiece
• Rod lens optical system
• All-metal Body
• Completely waterproof design1-877-613-2210 - view nowStarting at$1,200.00
"Heron" Rigid Video Borescope- Probe:
- Ø 6mm insertion probe diameter
- Full 360 degree rotation of the probe
- Optional articulating tip
- Optional interchangeable probes
- Working Lengths: 150 mm (5.9"), 300 mm (11.8"), 450 mm (17.7") and 700 mm (27.6")
- CMOS Video Camera Chip: 300,000 pixels, 60 fps@AVGA,
- Field of View (FOV) : 67°
- Depth of View (DOF) 1.0cm to infinity
- Direction of View (DOV) 0°/90°
- Mirror tips available in 35°~70° / 45°~90° / 55°~110°
- Waterproof Probe: IP 57
- Detachable Handle/Base
- 3.5” Colour LCD Display, with 720x480 pixels
- Image (JPEG )/Video (MPEG4) file capture
- AV output (PAL/NTSC selectable)
- 2 GB SD card for file storage
- USB port (1.1/2.0) to transfer data to a PC or Laptop
- LED Illumination with intensity adjustment
Base:Insertion probe
• Diameter: 6.0mm
• Length: 150 mm (5.9"), 300 mm (11.8"), 450 mm (17.7") and 700 mm (27.6")
• No articulation
• CMOS 300,000 pixels, 60 fps@AVGA
• Resolution (Dynamic Static) : 720 x 480 pixels, Video 720 x 480 pixels (30 fps),
• Field of View (FOV) : 67°
• 0°Direction of view (DOV), Lens able to attached 35°~70° / 45°~90° / 55°~110° Mirror
• 1.0cm to infinity Focal range
• Ingress Protection: IP 57
• Light Source: 4 LED, Illumination LED light adjustable
• Probe Working Temperature: -20° to 60° CImaging Hub
• 3.5”TFT LCD Monitor 320*240 Pixels
• Interface: Mini usb 1.1/ AV out/ Av in/
• MPG4(saved as AVI) Compression Format
• JPEG Still Image Storage Format
• TV system: NTSC & PAL
• Power:DC5V
• Battery: Rechargeable Li-Polymer Battery (3.7V)
• Language: 16 Languages1-877-613-2210 - view nowStarting at$2,100.00
Modular Rigid Borescope System with swivel lenses.- German made rod lens optic with maximum image quality
- Ø 4.4mm (0.175”)
- 278mm (11”) with lens working length
- 80° Field of View
- Rotatable Objective Sleeves with Viewing Directions of 30°, 70° and 90°
- German made rod lens optic with maximum image quality
- Focus ring on the eyepiece
- Full metal construction
1-877-613-2210
Loading...
