Heavy Duty Push Camera TROGLOPROBE SL

SKU:TPSL
Be the first to Ask a Question
Step 2:
from USD $8,900.00
B&H ships with UPS and FedEx. Shipping fees are calculated on a combined basis of weight, value (for insurance purposes), and destination.
Product Highlights:
  • PRO Grade Push Camera
  • ¼” Color CMOS Camera Chip with “Digital Clarity” 
  • Sensitivity Better than 0.1 lux
  • 57 Degree Field of View 
  • Interchangeable 1.9" Self-Leveling or 1" and 1.2" Straight View Camera Heads
  • Camera Head is IP68 waterproof up to 11 bars (160 psi) 
  • Full Skid Set for 3”, 4” and 6” Pipes
  • The Complete System is Waterproof to IP67 for all Weather Conditions
  • 61m/197 feet Reinforced Push Cable Length (optional up to 90m/295 feet)
  • Integral DVR with up to 32 Hours Recording on One Flash Card
  • 9-Page Textwriter with Footage Counter, Time & Date and Various Display Mode
  • Up to 8 hour Portable Use on the Rechargeable Battery
  • Wincan Approved System
  • Light weight, Base System Only 17kg (38 pounds)
  • Designed and manufactured in the UK
  • Optional 512Hz Sonde and Roller Skid Available
What’s Included
Push Rod, Keyboard, DVR, Battery, Camera Head, Rod adaptor, Memory Card, Skid, Charger/Power Supply, Manual.
Product Information
Request On-line Demonstration

The Trogloprobe-SL is a self-leveling push camera with a 1.9” diameter camera head and an industrial grade design suitable for tough environments. These units are manufactured in UK, using 30 years of experience and expertise to make them the best solution to inspect wet environments, since the camera head and push cable are IP68 waterproof and the reel, DVR box, and keyboard are also IP67. The Trogloprobe-SL is ideal for plumbing, pipe and duct lines, municipalities, oil rigs, dam inspections, bride or boat inspections, or any outdoor application in rainy weather.  The set includes an extremely durable camera head, along with a stiff, solid push cable, designed to inspect 3” up to 36” areas, up to 290 feet long.  

The Trogloprobe-SL push camera is a fully portable inspection device, powered by an advanced power cell which provides up to eight hours of portable use per charge. The 1.9” diameter (48mm) color camera head is machined from high grade stainless steel, with a 5mm thick sapphire lens over the ¼” CMOS camera chip. This camera chip also features a built in “Digital Clarity” which refines the live image on the monitor, and an extremely low light sensitivity, better than 0.1 lux. The camera head is IP68 waterproof to 11 bars of pressure (368 ft, 160psi). The self-leveling mechanism inside the camera head, which ensures that the image on the monitor is always right side up, is mounted on precision bearings, which are isolated from the outer body using Nitrile shock-absorbers. Around the outside of the camera chip are four high-intensity 4th generation LED lights (1400 lumens each), which provide more than twice the light of existing products. Increased light equals better imaging, and allows the push camera to operate in larger diameters pipes.

The reinforced push cable is durable and built to be very dependable for a wide variety of inspection areas. It is waterproof, with a 5 conductor epoxy glass core, and a length from standard 61 meters (200 feet) to optional 90 meters (295 feet). The reel is powder coated steel, with hard anodized aluminum, there is a built in onscreen foot counter. 

The live image is displayed on the 5.6” high-brightness LCD monitor, which comes with a sun shield, full keyboard to add text to captured files, and a compactflash memory card to capture images and video of your inspections.  These units are fully compatible with Wincan reporting software as well. 

The Trogloprobe-SL push camera can be equipped with an advanced 1" straight view camera (1.2" total diameter if it used without extension rod). It has utilized the very latest in CMOS sensor and LED technology. This unit can be supplied with a 20M (65 feet) super-flexible extension rod, contained in a coiler cage, which fits inside the base coiler.

This allows both the 1.9" and 1" cameras to be used on the same system and provides the greatest flexibility. The T710 1" camera can be used on internal domestic waste pipework to a minimum of 1.25". However, the performance of the camera will provide exceptional pictures in 6" and larger diameter pipes depending on the material.

Optional accessories, aside from the length of the push cable, include a 512Hz Sonde built into the camera head to allow you to locate the camera head underground (not available for 1" camera head with an extension rod), or optional rolling skid to center the camera head and help it roll down different diameter pipes. 

Note: Trogloprobe-SL is a specially ordered product. Conditions apply. Call for details.

Specifications

Base System

Mechanical:

  • Length: 540mm
  • Height: 643mm
  • Width: 302mm
  • Weight: Full System 18.5kg

Pushrod:

  • Type: 5 conductor Epoxy Glass Core
  • Max Length: 85m Optional (61m Standard length)
  • -20C to +85C (Storage temperature)
  • 0C to +50C (Operating temperature)
  • Sealing: IP 67 (Coiler) IP 68 11 Bar (Camera)

Construction:

  • Frame:Powder Coated Steel
  • Housings: Hard Anodised Aluminium

Electrical: 

  • Voltage: 10.8 to 14.6v DC
  • Power Consumption: 12 Watts
  • Power Cell: >96 Watt-hour Li Ion
  • Video Standard: PAL or NTSC (auto)
  • Display: 5.6 LCD
  • Resolution: 540 LPPH
  • Brightness: 900cd/ft Digital

Recorder:

  • Recording format: Digital to CF Card (MPEG4)
  • Recording capacity: 32 Hours (60 mins per Gb)
  • Recording resolution: 640 x 480
  • Keyboard: Sealing: Waterproof to IP68 (160 psi)
  • Control: Textwriter/DVR/Cameras

Charger:

  • Input Voltage: 90VAC-255VAC
  • Output Voltage: 12.6V
  • Output Current: 2.6A
  • Charge Time: ~4 hours

 

Standard 1.9" T800 Self-levelling Camera:

Mechanical

  • Full diameter: 33.4mm
  • Overall length: 69mm
  • Diameter: 48mm
  • Material: 300-grade stainless steel
  • Weight 350g
  • Uprighting: passive with damping
  • Window: Sapphire, 5mm deep
  • Internal: Nitrile shock-absorbers

Electrical

  • Voltage: 22v to 25v
  • Consumption: ~7 watts
  • Output: Composite video
  • Lighting: 4 x high power LED 1400 Lumens
  • Video Sensor: Digital Clarity CMOS ¼
  • Sensitivity: Better than 0.1 lux
  • Horizontal Resolution: 540 TVL lines per picture height
  • Digital Noise Reduction
  • Digital Video Processing
  • Fixed white balance for faithful colour rendition

Lens

  • Focal Length: 4.2 mm
  • Angle of view: 57° diagonal
  • Iris Control: Fixed iris, auto electronic shutter
  • Focus range: 150mm to infinity

Environmental Specification

  • Temperature: -20°C to +85°C (Storage) 0°C to +50°C (Operating)
  • Sealing: IP68 11 Bar (160psi)

Standard camera on the Trogloprobe-SL Can be fitted to:

Optional Sonde: 512Hz, 640Hz, 8.192KHz, 32.768KHz

Skid sets for 3 (75mm) - 12 (300mm)

 

Optional T710 1" Straight View Camera Head

Mechanical

  • Camera diameter: 1" (25mm) 
  • Camera length: 32mm
  • Camera adaptor diameter without extension push cable: 1.17"

Electrical

  • Voltage: 22v to 25v
  • Consumption: 4 watts
  • Output: Composite video
  • Lighting: 6 x high power LED 300 Lumens
  • Video Sensor: Digital Clarity CMOS ¼
  • Sensitivity: Better than 0.1 lux
  • Horizontal Resolution: 540 TVL lines per picture height
  • Digital Noise Reduction
  • Digital Video Processing

Lens

  • Focal Length: 5.1mm
  • Angle of view: 57° diagonal
  • Iris Control: Fixed iris, auto electronic shutter
  • Focus range: 50mm to 250mm
Reviews

Be first ... Write a review

Write Your Own Review

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Value
Price
Questions & Answers

No questions asked yet, be the first to Ask a Question

Multimedia

Others Also Bought

Please wait...

Qty Price: