Anaconda-CH Pan-and-Tilt Chimney Inspection Camera

The “Anaconda - CH" Pan-and-Tilt Chimney Camera is one of the most advanced, affordable, devices to use for inspecting chimneys, air ducts, flue liners, fireplaces, and flues. In contrast with the regular "Anaconda" (for pipe inspections), which has a semi rigid push rod cable, the "Anaconda - CH" features a soft rod and requires roof access to lower the camera down from the top of the chimney.       

The best feature of this unit is the ability to pan the camera head 360⁰ and tilt it 180⁰ to view and capture every detail of your inspection. This allows technicians to get a full view and assess the condition of the liner and joints for any imperfections.  The camera head features a compact (53mm) detachable design which is completely water and dust proof and contains 14 super bright LED lights to illuminate the walls and provide consistent illumination. The light intensity is easily controlled to avoid flaring, and the sensitive Sony CCD chip is protected by a thick scratch-proof glass lens, which can be easily cleaned with a lens spray or washed off.

The imaging HUB features a 6.5” color TFT wide screen monitor with video (MPEG4/AVI) and image (MPEG) capture of your inspections saved directly to an SD memory card. The image can also be output via a USB interface.  

Included in the set is a specially designed centering bracket-skid, to ensure that the camera is placed directly in the center of the canal.

Optional lengths for the insertion probe range from 10 meters (32.8 foot) (standard) to 30 meters (98 foot).  

The state-of-the-art battery packs provide 6 hours of continuous operation. While the power supply offers simultaneous system operation while recharging the battery.

The “Anaconda-CH” Pan-and-Tilt Push Camera is a must have for chimney, flues and fireplace inspections.

Camera.

CCD Type: SONY CCD
Horizontal resolution: 480TVL
Diameter of the camera head: 53mm (2.08in)
Pan &Tilt:  Pan: 360degrees; Tilt: 180degrees
Auto level: Auto
Focus: Manual
Optical system 2.8mm (0.11in)

LED Lights

LED Lights: 14 LEDS
Brightness of the LEDS: Controllable

Display & Storage system

Size of the screen: 6.5’’ TFT Monitor
Brightness: 500cd/m2
Resolution: 640*480
Video format: MPEG4/AVI
Picture format: MPEG
Memory card: 4G(optional to 8G)
USB interface: USB output

Soft Cable Length: 10-30m (32.8 -98.4ft) (optional)

Bracket: Centering. To make sure the camera is in the center of the chimney

Power supply

Battery: DC12V 13000mah
Working time:  Standby(LED off): 12hours;
               In operation(LED on): 4hours